Verified answer

TO TURN UP DOWN VOLUME

Using the Remote Control

Press the Power button to turn the receiver on or off.

Press Menu to open the main menu.

Use the Page Up or Down arrows to rapidly move through menu or guide

information.

Press the Mute button to activate the mute function. Press the Mute button a

second time to restore the sound.

Press the (+) side of the Volume button to increase the sound volume and the (-)

side to reduce the sound volume.

Press the Guide button to view the digital programming guide.

Press the Up or Down arrows to select channels or navigate through a menu.

Press the Theme (Left) arrow to navigate the menus by theme (sports, movies,

etc…) and the Browse (Right) arrow to view future programming choices.

Press Select to activate the item that you have highlighted.

Press Info to view more information about a program or the highlighted item.

Press View to display the program banner.

Press Cancel to quit or exit any menu that you have activated.

Press the Recall button to go back to the last channel that you were viewing

Use the numbers on the Number pad to go directly to the channel you want to

view.

For more information about using your replacement remote control, please

consult your User’s Guide or contact D ISH Network at 1-800-333-DISH (3474)

*Retailers using the Post Receipt Exchange Program will need to return all accessories in order to receive replacements.

123621 Rev AA

To set your new Dish remote to adjust the receiver volume:

Note: Please make sure the TV sound volume is not turned down or muted before beginning.

• Press the Menu button on the receiver remote.

• Use the Arrow buttons to highlight the System Setup option, then press the

Select button.

• Select the Volume Control option.

• Select the DISH Remote Volume Control option to control volume using

your DISH remote. Select TV Remote Volume Control to use your existing

TV remote to control the volume.

TO TURN ON/OFF TV

Program the Remote to Control My Devices - Back to Top

Try to use your remote to control your devices. If the remote does not work for a device,

you can assign a different device code to the appropriate mode key. If the remote

provides only limited functionality for a device, you can look for a code that provides

more functionality. Before you begin, make sure you know the brand name of the device

you want to control.

Note: Some remote keys may be assigned to operate one device type only. For example,

volume control may be assigned to the TV only. If this is the case, you can reprogram

power, volume, and channel control using procedures later in this guide.

Assigning a Different Device Code to a Mode Key

1. Find the codes for your brand of device in the appropriate setup code list at the end

of this guide. For example, look under TV Group if you need to program the remote

to operate your TV.

2. Turn on your device.

3. Press and hold SELECT and the appropriate mode key until all of the mode keys

blink twice. For example, to set up the TV, press and hold SELECT and TV.

Note: If you reassigned mode keys, you may, for example, press SELECT and VCR

to program the VCR mode key with a TV code.

4. Enter the first setup code for the device. All mode keys blink twice to indicate that

the code entry was accepted.

5. Point the remote at the device, and press POWER, , or to test the device.

6. Did the device operate correctly?

If yes, write down the code that worked on the cover of this guide.

You may need it again if the device code is accidentally erased.

If no, repeat these steps using a different setup code.

Note: If none of the codes listed for your brand of device operate the device

correctly, go to What If None of the Codes Work for instructions.

7. Repeat this procedure for each mode key you want to program.

What If None of the Codes Work? - Back to Top

If none of the codes listed for your brand of device operate the device correctly, you can

search through the code library for a valid code.

Improving Your Reaction Time

When you search the code library, you need to be ready to press SELECT as soon as the

remote turns off your device. Therefore, make sure you are familiar with the location of

the SELECT key before you begin this procedure.

Hope this helped.

remove chip from remote